Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee M3.5 x 12mm Pan Head Phillips Screw
Model Number: 05-78-1005
The Milwaukee 05-78-1005 is a genuine OEM M3.5 x 12mm pan head Phillips machine screw, a small black steel fastener used to hold components together in Milwaukee tools. It has an M3.5-0.6 thread, a 12mm length, a pan head with a flat bearing surface and a slightly rounded top, and a Phillips cross-drive. One important distinction to watch: Milwaukee also makes a same-size M3.5 x 12mm pan head screw with a T-10 Torx drive, part number 05-78-1010, so the two look nearly identical except for the drive recess. Order this Phillips version by its exact part number to be sure you get the right drive and the right fastener for the position. Using the genuine Milwaukee OEM screw ensures the correct thread, length, head, drive, and grade, where a mismatched screw can strip the drive, fail to seat, or not hold the joint.
This screw is identified on the Milwaukee service parts lists for multiple circular saws: the 2830-20 M18 FUEL Rear Handle Circular Saw, where it is the M3.5 x 12mm Pan Hd. Phillips Machine Screw at Figure 7 (bulletin 54-40-0830), and the 2731-20 and 2732-20 M18 FUEL 7-1/4 in. Circular Saw, where it is the M3.5 x 12mm Pan Hd. Phillips Screw at Figure 3 (bulletin 54-40-2635). Milwaukee notes that the application list for a common fastener like this is not intended to be complete, so it may also be used on other Milwaukee tools; confirm the figure position and the quantity required for your specific tool on its parts diagram. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering, since running production changes can alter part compatibility within the same catalog number.
Features
- Genuine Milwaukee OEM pan head Phillips machine screw
- M3.5-0.6 thread, 12mm length
- Pan head with Phillips cross-drive, black steel
- Fastener used in Milwaukee circular saws and other tools
- Fits the 2830-20 M18 FUEL Rear Handle Circular Saw (Figure 7)
- Fits the 2731-20 and 2732-20 M18 FUEL 7-1/4 in. Circular Saw (Figure 3)
- Milwaukee's application list is not complete; may be used on other tools
- Not the same as the T-10 Torx version (05-78-1010) of the same size
- Order by exact part number to get the correct Phillips drive
- Correct thread, length, head, drive, and grade for the position
- Genuine Milwaukee replacement, not a generic hardware-store screw
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 05-78-1005
- Official Description: M3.5 x 12mm Pan Hd. Phillips Machine Screw
- Component Type: Pan head Phillips machine screw (fastener)
- Thread and Length: M3.5-0.6 thread, 12mm length; black steel
- Primary Fitment: Milwaukee 2830-20 Rear Handle Circular Saw (Figure 7) and 2731-20 / 2732-20 7-1/4 in. Circular Saw (Figure 3)
- Also Referenced On: Other Milwaukee tools; Milwaukee's application list is not complete, so verify using Milwaukee's online parts lookup
- Parts Diagram Position: Figure 7 (bulletin 54-40-0830); Figure 3 (bulletin 54-40-2635)
- Quantity: Sold individually; confirm the quantity your tool uses on its diagram
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) M3.5 x 12mm pan head Phillips machine screw
The tool and the mating components are NOT included and are sold separately. Always verify by serial number using Milwaukee's online parts lookup before ordering, and order by the exact part number, since the same-size T-10 Torx screw (05-78-1010) is a different part.
