Product Description
Milwaukee M18 FORCE LOGIC 13/16 x 1-5/8 Half-Strut Shearing Dies
Model Number: 49-16-1316
The Milwaukee 49-16-1316 are 13/16 x 1-5/8 Shearing Dies for the Milwaukee M18 FORCE LOGIC Strut Shear — the die set that cuts half-strut strut channel cleanly to length for half-strut (13/16 in. x 1-5/8 in.) channel used in lighter-duty electrical and mechanical support applications where the full 1-5/8 in. square strut is more capacity than required — reducing material cost and weight in the support structures for lighter conduit runs, cable tray, and low-weight equipment mounting. The M18 FORCE LOGIC Strut Shear uses a hydraulic shearing action to cut strut channel without the grinding sparks, burrs, and rough edges of abrasive cut-off wheel cutting — producing clean, flat-ended cuts that require no deburring for immediate use in strut installation. The 13/16 x 1-5/8 die set is the specific profile for this strut channel cross-section; Milwaukee machines each die set to match the exact strut profile for the shear to grip and cut the channel cleanly without deforming the strut's rail profile during the cutting cycle.
Strut die sets are interchangeable in the M18 FORCE LOGIC Strut Shear, allowing the same tool to cut different strut profiles by swapping the die set for the specific strut channel being installed. The die set is a wear item in the shear system — the cutting edges dull progressively from production strut cutting and require replacement when cut quality degrades. The M18 cordless platform provides the freedom of movement for cutting strut channel at any location in commercial mechanical and electrical construction installations without being tethered to an outlet or generating the sparks and noise of grinder cutting methods. Verify M18 FORCE LOGIC Strut Shear model compatibility before ordering die sets.
Features
- 13/16 x 1-5/8 die set for clean hydraulic shearing of half-strut channel without sparks or burrs
- Die profile matched to half-strut channel cross-section for clean no-deformation cuts
- Interchangeable with other die sets on the M18 FORCE LOGIC Strut Shear
- Replace die set when cut quality degrades from production strut cutting use
- Verify M18 FORCE LOGIC Strut Shear model compatibility before ordering
Specifications
- Die Profile: 13/16 x 1-5/8
- Type: Half-Strut Strut Shearing Dies
- Compatible Tool: Milwaukee M18 FORCE LOGIC Strut Shear (verify model)
- Application: Half-Strut Strut Channel Cutting for Commercial Mechanical and Electrical Installation
Includes
- Milwaukee 49-16-1316 13/16 x 1-5/8 Strut Shearing Die Set
