Product Description
Milwaukee M18 FORCE LOGIC 7/8 x 1-5/8 Narrow Strut Shearing Dies
Model Number: 49-16-0078
The Milwaukee 49-16-0078 are 7/8 x 1-5/8 Shearing Dies for the Milwaukee M18 FORCE LOGIC Strut Shear — the die set that cuts narrow strut strut channel cleanly to length for 7/8 in. x 1-5/8 in. narrow strut channel used in specific support applications where this intermediate strut width is specified for the load requirements and installation geometry of the mechanical and electrical support system. The M18 FORCE LOGIC Strut Shear uses a hydraulic shearing action to cut strut channel without the grinding sparks, burrs, and rough edges of abrasive cut-off wheel cutting — producing clean, flat-ended cuts that require no deburring for immediate use in strut installation. The 7/8 x 1-5/8 die set is the specific profile for this strut channel cross-section; Milwaukee machines each die set to match the exact strut profile for the shear to grip and cut the channel cleanly without deforming the strut's rail profile during the cutting cycle.
Strut die sets are interchangeable in the M18 FORCE LOGIC Strut Shear, allowing the same tool to cut different strut profiles by swapping the die set for the specific strut channel being installed. The die set is a wear item in the shear system — the cutting edges dull progressively from production strut cutting and require replacement when cut quality degrades. The M18 cordless platform provides the freedom of movement for cutting strut channel at any location in commercial mechanical and electrical construction installations without being tethered to an outlet or generating the sparks and noise of grinder cutting methods. Verify M18 FORCE LOGIC Strut Shear model compatibility before ordering die sets.
Features
- 7/8 x 1-5/8 die set for clean hydraulic shearing of narrow strut channel without sparks or burrs
- Die profile matched to narrow strut channel cross-section for clean no-deformation cuts
- Interchangeable with other die sets on the M18 FORCE LOGIC Strut Shear
- Replace die set when cut quality degrades from production strut cutting use
- Verify M18 FORCE LOGIC Strut Shear model compatibility before ordering
Specifications
- Die Profile: 7/8 x 1-5/8
- Type: Narrow Strut Strut Shearing Dies
- Compatible Tool: Milwaukee M18 FORCE LOGIC Strut Shear (verify model)
- Application: Narrow Strut Strut Channel Cutting for Commercial Mechanical and Electrical Installation
Includes
- Milwaukee 49-16-0078 7/8 x 1-5/8 Strut Shearing Die Set
