Product Description
Milwaukee 9-1/2 in. SDS+ Tile Chisel
Model Number: 48-62-6030
The Milwaukee 48-62-6030 is a 9-1/2 in. SDS+ Tile Chisel for use with SDS+ rotary hammers and combination hammers in hammer-only mode — a specialty chisel for removing ceramic tile, porcelain tile, stone tile, and other hard floor and wall tile materials during renovation, remodeling, and tile replacement work. Tile removal with a powered rotary hammer and tile chisel is dramatically faster than manual hand-chisel tile removal — the hammer's high-frequency impact energy drives the tile chisel blade under each tile to pop the tile free from the adhesive or mortar setting bed, removing tiles at a rate that manual removal cannot approach when clearing large tiled areas in bathroom, kitchen, and commercial tile renovation projects. The tile chisel profile is optimized for the specific geometry of tile removal — the blade width, angle, and tip geometry are designed to undercut the tile and adhesive layer cleanly without excessive damage to the substrate when carefully operated.
Milwaukee drop-forges the tile chisel from high-grade steel with heat-treated working areas for the impact resistance needed through sustained SDS+ rotary hammer tile removal work without blade deformation or fracture. The SDS+ shank provides positive anti-rotation locking in the hammer's tool holder for controlled chisel direction throughout the tile removal operation. The 9-1/2 in. overall length provides the standard working geometry for SDS+ chiseling, with adequate blade length for the tile removal depth and the typical clearance between the hammer body and the tile surface during floor and wall tile removal. Operator technique is important for substrate preservation — maintaining a shallow approach angle and working the chisel progressively under each tile minimizes substrate damage during removal.
See Milwaukee's complete SDS+ chisel lineup for all available profiles — flat, bull point, scaling, winged — for every concrete demolition and surface work application.
Features
- Tile removal profile for removing ceramic, porcelain, and stone tile during renovation
- Powered tile removal dramatically faster than manual hand-chisel methods
- Drop-forged high-grade steel with heat-treated work area for SDS+ impact durability
- SDS+ shank for anti-rotation locking on SDS+ rotary and combination hammers
- 9-1/2 in. standard length for typical tile removal working geometry
Specifications
- Profile: Tile Chisel
- Overall Length: 9-1/2 in.
- Shank: SDS+
- Application: Ceramic, Porcelain, and Stone Tile Removal During Renovation
Includes
- (1) Milwaukee 48-62-6030 9-1/2 in. SDS+ Tile Chisel
