Product Description
Milwaukee SDS+ Flat Chisel — 3/4 in. x 10 in.
Model Number: 48-62-6015
The Milwaukee 48-62-6015 is an SDS+ Flat Chisel in 3/4 in. x 10 in. for use with SDS+ rotary hammers and demolition hammers in hammer-only mode — a heavy-duty concrete and masonry demolition, chipping, and surface preparation tool for breaking, channeling, and cleaning work in concrete block, brick, and poured concrete construction. The flat chisel profile is the most versatile and widely used chisel geometry in demolition and concrete work — the wide, flat blade distributes the hammer's impact energy across a broad contact surface for controlled material removal in breaking out areas of concrete and masonry, cutting channels through block walls for conduit and pipe installations, removing concrete form overflow and mortar seepage at construction joints, and performing general surface preparation on concrete structural elements. Milwaukee manufactures this chisel by drop-forging high-grade steel into the correct geometry, then applying a precision heat treatment process to the working area that achieves the hardness and toughness needed to maintain the chisel tip's geometry and cutting effectiveness through sustained repetitive impact work without premature tip deformation, chipping, or fracture.
The SDS+ shank locks positively into the tool-free SDS+ chuck of any SDS+ rotary hammer or combination hammer operating in hammer-only mode, providing secure chisel retention under the high-energy impact loads of demolition work without the chisel working loose or rotating in the chuck during operation. The 10 in. working length provides the necessary clearance between the hammer's chuck face and the work surface to maintain good visibility and hammer control during chipping and channeling operations — keeping the hammer body appropriately distanced from the work zone. Milwaukee's high-grade forged steel construction and heat-treated working area deliver up to 20% longer service life compared to standard-quality chisels, reducing replacement frequency and per-hole cost in high-volume demolition and channeling applications.
Milwaukee offers a complete SDS+ chisel lineup to cover all demolition and surface preparation applications: bull point chisels for breaking and point work, scaling chisels for scale and spatter removal, tile chisels for tile removal, floor scrapers for adhesive and coating removal, and mortar scrapers for joint cleaning — in addition to this flat chisel for general demolition and channeling.
Features
- Drop-forged high-grade steel with heat-treated work area — up to 20% longer life than standard chisels
- Flat profile for demolition, concrete channeling, form cleaning, and surface preparation
- 3/4 in. x 10 in. geometry for effective chisel width and working reach in SDS+ hammers
- SDS+ shank for secure tool-free engagement on all SDS+ rotary and demolition hammers
- Available in full chisel lineup: bull point, scaling, tile, floor scraper, and mortar scraper profiles
Specifications
- Profile: Flat Chisel
- Size: 3/4 in. x 10 in.
- Shank: SDS+
- Material: Drop-Forged High-Grade Steel, Heat-Treated Work Area
Includes
- (1) Milwaukee 48-62-6015 SDS+ Flat Chisel 3/4 in. x 10 in.
