Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Copper Tubing Cutter Replacement Wheels
Model Number: 48-38-0010
The Milwaukee 48-38-0010 is a set of genuine OEM Copper Tubing Cutter Replacement Wheels for compatible Milwaukee copper tubing cutters — the precision-ground cutting wheels that are the primary consumable wear component in Milwaukee tubing cutters. The cutting wheel is the only part of the tubing cutter that contacts the copper tubing during cutting — it is pressed against the tubing surface and rolled around the tube circumference to score and progressively penetrate through the tube wall as the cutter is tightened. Over extended use, the cutting wheel's sharp V-shaped cutting edge dulls and develops flat spots or chipping from the repeated contact with copper tube material, eventually producing cutting quality problems including ragged cut edges, excessive tubing flaring, and difficulty completing cuts cleanly. Replacing the worn cutting wheel with a genuine Milwaukee OEM replacement wheel restores the sharp, precision-ground edge geometry needed for clean, square cuts with minimal wall deformation on each use.
Milwaukee OEM replacement wheels are manufactured to the correct wheel diameter, cutting edge angle, and material hardness specification for Milwaukee tubing cutters — using an incorrect or non-OEM cutting wheel with wrong geometry, incorrect hardness, or wrong diameter can produce cut quality problems, excessive tubing flaring, or damage to the cutter's roller bearing from dimensional mismatch. Always verify compatibility with your specific Milwaukee tubing cutter model before ordering. Replacement wheel availability at a fraction of the cost of a new cutter makes the Milwaukee replacement wheel the economical approach to restoring tubing cutter performance versus replacing the entire tool when the wheel dulls.
Features
- Genuine Milwaukee OEM cutting wheels — correct geometry and hardness for Milwaukee cutters
- Restores sharp cutting edge for clean, square cuts with minimal tubing wall deformation
- Replace when cut quality degrades — ragged edges, excessive flaring, or difficulty cutting
- Economical restoration vs. replacing entire tubing cutter when wheel dulls
- Verify tubing cutter model compatibility before ordering
Specifications
- Type: Cutting Wheel Replacement Set
- Compatible Tools: Milwaukee Copper Tubing Cutters (verify model)
- Application: Copper Tubing Cutting
Includes
- Milwaukee 48-38-0010 Copper Tubing Cutter Replacement Wheels
