Product Description
Milwaukee SHOCKWAVE Conduit Reamer Replacement Blade Set
Model Number: 48-32-2351
The Milwaukee 48-32-2351 is a SHOCKWAVE Conduit Reamer Replacement Blade Set — providing replacement blades for Milwaukee's SHOCKWAVE conduit reamer for restoring full reaming sharpness when the original blades dull from extended use deburring and chamfering conduit ends. Conduit reaming is a mandatory step after every conduit cut in electrical installation — the reciprocating saw or conduit cutter creates a sharp interior burr at the cut end that must be removed before the conductors are pulled through the conduit. If the burr is not removed, it creates a sharp edge that abrades and damages wire insulation during pulling operations, potentially causing insulation failure and short circuit conditions in the finished installation. Milwaukee's SHOCKWAVE conduit reamer drives with any 1/4 in. hex shank impact driver or drill, spinning the reamer blades inside the conduit end to remove the burr cleanly and quickly compared to manual hand reamers and the T-handle deburring tools that require manual rotation.
The blades are the cutting elements that contact the conduit's interior edge during reaming — they progressively dull through the abrasive contact of the conduit steel or aluminum edge and eventually require replacement to maintain the fast, clean reaming action that makes the power reamer productive compared to manual deburring. Milwaukee SHOCKWAVE replacement blades are manufactured to the correct geometry and material specification for the SHOCKWAVE reamer body, providing consistent reaming performance from a fresh blade set that matches the performance of the original blades. Replacing blades when they lose cutting effectiveness is significantly more economical than replacing the complete reamer assembly, and significantly faster than switching to manual deburring when the power reamer's blades are dull.
Compatible with Milwaukee's SHOCKWAVE conduit reamer for EMT, IMC, and rigid conduit in the standard trade sizes — see Milwaukee's conduit reamer accessory lineup for compatible reamer sizes and blade sets.
Features
- Replacement blades restore SHOCKWAVE conduit reamer to full deburring sharpness
- Conduit reaming required after every cut to remove burrs that damage wire insulation
- Correct blade geometry for clean, fast interior burr removal from cut conduit ends
- Economical blade replacement vs. complete reamer replacement when blades dull
- Compatible with Milwaukee SHOCKWAVE conduit reamer for EMT, IMC, and rigid conduit
Specifications
- Compatible Tool: Milwaukee SHOCKWAVE Conduit Reamer
- Application: Interior Burr Removal from Cut Conduit Ends (EMT, IMC, Rigid)
Includes
- Milwaukee 48-32-2351 SHOCKWAVE Conduit Reamer Replacement Blade Set
