Product Description
Milwaukee SDS+ Bit 5/32 in. x 6 in. with 1/4 in. Hex
Model Number: 48-20-7096
The Milwaukee 48-20-7096 is a concrete drill bit in 5/32 in. diameter with a 6 in. overall length featuring dual shank compatibility — an SDS+ shank at one end and a 1/4 in. hex shank at the other end, providing a single bit that can be used in either SDS+ rotary hammer chuck systems or standard 1/4 in. hex shank keyless drill chucks and impact drivers. This dual-shank design allows the operator to use a single 5/32 in. bit in whatever tool is available at the job location — an M18 SDS+ rotary hammer for maximum drilling speed in hard concrete, or an impact driver or standard drill with a 1/4 in. hex chuck where the SDS+ hammer is not immediately available. The versatility of using one bit in multiple tool formats reduces the total bit inventory needed for 5/32 in. anchor drilling work.
Milwaukee engineers the carbide tip with the correct geometry for concrete drilling in both the rotary-plus-impact action of SDS+ rotary hammer use and the rotary-only drilling action of a 1/4 in. hex drill chuck — the tip must perform adequately in both drive configurations for the dual-shank design to provide its intended versatility benefit. The 5/32 in. diameter is the standard pilot hole size for light-duty concrete screw anchors and small expansion fasteners used throughout commercial and residential construction. The compact 6 in. overall length provides the tight-clearance drilling access advantages of a short bit for overhead and confined-space anchor installations that characterize the small anchor applications where this diameter is most used. The 1/4 in. hex end's universal compatibility means it works in any standard keyless chuck or 1/4 in. hex impact driver with no adapter required.
See Milwaukee's complete SDS+ concrete bit lineup for SDS+-only bits in bulk pack quantities for high-volume anchor installation at this diameter.
Features
- Dual shank — SDS+ end for rotary hammer, 1/4 in. hex end for drills and impact drivers
- Single bit works in multiple tool formats — reduces bit inventory for 5/32 in. anchor work
- 5/32 in. for light-duty concrete screw anchors and small expansion fasteners
- Compact 6 in. length for overhead and confined-space anchor drilling
- Carbide tip performs in both rotary-plus-impact and rotary-only drilling modes
Specifications
- Diameter: 5/32 in.
- Overall Length: 6 in.
- Shank Options: SDS+ and 1/4 in. Hex (dual-end)
- Tip: Carbide
Includes
- (1) Milwaukee 48-20-7096 SDS+ Bit 5/32 in. x 6 in. with 1/4 in. Hex
