Product Description
Milwaukee M12 FUEL Stubby 3/8 Impact Wrench Kit
Model Number: 2562-22
Our new 3/8 in. Stubby Impact Wrench delivers the Most Power, Is Lighter Weight and More Compact while delivering 50 Percent Faster Application speeds. The POWERSTATE Brushless Motor Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. Our solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can not fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL for greater precision and customization to your desired power output, including AUTO SHUT-OFF that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly. Kitted with our M12 REDLITHIUM HIGH OUTPUT XC5.0 and CP2.0 Battery Pack that delivers 25 Percent more power, runs 25 Percent cooler, and is chemical resistant to protect against exposure to common oils, greases, and solvents.
Features:
- Lighter Weight and More Compact
- Up to 550 ft-lbs of Nut-Busting Torque
- 50 Percent Faster Application Speeds
- Mode 1 RPM: 0-930; Mode 2 RPM: 0-2,100; Mode 3 RPM: 0-3,000; Mode 4 RPM: 0-1,300
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- 4-Mode DRIVE CONTROL provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Auto shut-off mode prevents over tightening and increases productivity by applying no more than 15 ft-lbs. of torque.
- New Battery Isolation System for secured battery connection and reduced vibration transmitted to the pack
- Compatible with all M12 batteries and Chargers
- Friction ring socket retention system: Reduces downtime on applications involving frequent changing of accessories
- Single handed mode changes for increased productivity
- Mode 1 IPM: 0 - 1,500; Mode 2 IPM: 0 - 3,000; Mode 3 IPM: 0 - 3,300; Mode 4 IPM: 0 - 3,300
Specifications:
- Wrench Type: Compact
- Anvil Type: Friction Ring
- Anvil Size: 3/8 in
- Fastening Torque: 400 ft/lbs
- Maximum Torque: 6600 in-lbs
- IPM: 0-3300 IPM
- Nut-Busting Torque: 550 ft-lbs
- Power Source: Cordless
- Motor Type: POWERSTATE Brushless
- Material Composition: Metal
- Length: 4.8 in
- Weight: 2.2 lb
- Height: 7.2 in
- Width: 2.4 in
- Fuel: Yes
- Voltage: 12V
- Brushless: Yes
- Battery System: M12
- Chuck Type: Not Applicable
- Chuck Size: Not Applicable
- DRIVE CONTROL: 4-Mode w/ Auto Shut-Off Mode and Bolt Removal Mode
- BPM: 0-3300 bpm
- Maximum RPM: 3000 rpm
- RPM Range: 0-3000 RPM
Includes:
- (1) M12 FUEL Stubby 3/8 in. Impact Wrench (2562-20)
- (1) M12 REDLITHIUM HIGH OUTPUT XC5.0 Battery Pack (48-11-2450)
- (1) M12 REDLITHIUM HIGH OUTPUT CP2.5 Battery Pack (48-11-2425)
- (1) M12 Lithium-ion Battery Charger (48-59-2401)
- (1) Contractor Bag
