Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukees website please click here:
Milwaukee 10-32 x 5/8 in. T25 Taptite Pan Head Screw
Model Number: 06-82-5330
The Milwaukee 06-82-5330 is a genuine OEM 10-32 x 5/8 in. T-25 Torx Pan Head Taptite Screw for use in compatible Milwaukee tools. Taptite is a thread-forming screw specifically engineered to displace and form its own mating threads as it is driven into a pre-drilled pilot hole in metal — eliminating the need for a pre-tapped thread in the receiving material. The thread-forming process creates a precise, interference-fit thread that provides strong resistance to loosening under the vibration and dynamic operating loads common in power tool assemblies. The #10-32 designation identifies this as a #10 diameter screw with 32 threads per inch — a fine-pitch imperial thread commonly used for securing housing panels, guards, shoe assemblies, and structural brackets throughout tool assemblies. The T-25 Torx drive delivers superior torque transfer and reduced cam-out compared to Phillips or slotted drives — particularly important for the controlled installation torque required during thread-forming in metal. The pan head profile provides a low-profile, slightly rounded head with a flat bearing surface above the fastened material. The 5/8 in. length provides a medium-depth fastener connection suited for standard housing and bracket thicknesses. A stripped, broken, or missing screw requires replacement to restore proper assembly integrity and safe tool operation.
Using a genuine Milwaukee OEM Taptite screw ensures the correct 10-32 thread-forming profile, 5/8 in. length, T-25 Torx drive, and pan head geometry for the fastener interface it serves. Non-OEM screws may not match the original Taptite thread profile, leading to improper thread formation in the metal boss or insufficient clamping force at the joint. Always verify your catalog number and serial number on Milwaukee's website before ordering to confirm this is the correct screw for your specific unit.
Features
- Genuine Milwaukee OEM 10-32 x 5/8 in. T-25 Taptite pan head screw for compatible Milwaukee tools
- Taptite thread-forming design cuts its own threads in metal — no pre-tapping required
- Thread-forming interference fit provides strong resistance to loosening under vibration
- T-25 Torx drive provides superior torque transfer and reduced cam-out during installation
- Verify catalog number and serial number on Milwaukee's website before ordering
Specifications
- Thread Size: #10-32
- Length: 5/8 in.
- Drive: T-25 Torx
- Head Style: Pan Head
- Type: Taptite Thread-Forming Screw
Includes
- (1) Milwaukee 06-82-5330 10-32 x 5/8 in. T-25 Taptite Pan Head Screw
